Ford Intake Manifolds for for 332-428 V8

PERFORMER 390 (IDLE-5500 RPM)

Designed for street 332-352-360-390-406-410-427-428 c.i.d. Ford V8s with medium- or low-rise cylinder heads. #2105 is stock replacement/street legal part for 332, 352, 360, 390, 406, 410, 427 and 428 V8s with OEM 4V carb.; 1966-72 (1973 non-CA); except stock equipped EGR. Manifold not equipped with EGR; will not accept stock Motorcraft spread-bore carburetor or fit heavy-duty 361 and 391 Ford truck V8s. See Power Package Graph.

Performer 390 (non-EGR) #2105

Carburetor Recommendations:

Performer #1405 (600 cfm) - Ref. A, F, I, K, N, O, for auto. trans. use Edelbrock #1483

Performer #1406 (600 cfm) - Ref. A, F, I, N, for auto. trans. use Edelbrock #1483

Performer #1411 (750 cfm) - Ref. A, F, I, N, for auto. trans. use Edelbrock #1483

Installation Notes: Recommended intake gasket: Fel-Pro #1247. Manifold height: A-4.35", B-5.50" (same as stock). See manifold selection page.

Performer-Plus Camshaft Kit

Designed for use with Edelbrock Performer 390 manifold (#2105) on 1963 and later 360/390 c.i.d. Ford V8s.

Performer-Plus Camshaft/Lifters/Lube Package #2106*
Installation Notes: See Cam page for cam specs.

Power Package Accessories for #2105 & 2106
Manifold Bolts #8508 | Roller Timing Set #7808 | Chrome Valve Covers #4462 | Valve Springs #5806 | Retainers #9720 | Valve Springs #5906

PERFORMER RPM FE (1500-6500 RPM)

Designed for high-performance street 390-406-410-427-428 c.i.d. Ford FE V8s with standard 390-428 c.i.d., 427 low/medium-rise or Edelbrock Performer RPM FE cylinder heads. The dual-plane constant cross-sectional area design builds low and mid-range acceleration while optimized runner paths make top-end horsepower. The Performer RPM FE will accept square-bore carburetors and has a provision for adding the PCV or breather flange. No exhaust crossover passage. See how to get 418 HP in Ford 390 c.i.d. V8. Read what the November 1996 issue of Super Ford Magazine had to say about Edelbrock's Ford FE cylinder heads in "Bauxite Bomber."

Performer RPM FE (non-EGR) #7105*

Carburetor Recommendations:
Performer #1407 (750 cfm) - Ref. A, F, I, K, N, O, for automatic transmissions use Edelbrock #1483

Installation Notes: Recommended intake gasket: Fel-Pro #1247. Manifold ht.: A-4.89", B-6.04". See manifold selection page.

PERFORMER RPM CAMSHAFT KIT

Designed for use with Edelbrock Performer RPM FE manifold (#7105) on 1963 and later 390-428 c.i.d. Ford V8s (except 427 side-oiler). Must use adjustable valve train.

Performer RPM Camshaft/Lifters/Lube Package #7106*

Power Package Accessories for #7105 & #7106
Roller Timing Set #7808 | Retainers #9720 | Valve Springs #5706 | Cylinder Heads #6006 | Chrome Valve Covers #4462

---

Reference Notes

A -- Carb will work with non-EGR system. 
B -- Carb will work with EGR system. 
C -- Adapter for this carb supplied with manifold.
D -- No carb lever for the auto. trans. kickdown rod.
F -- Use carb base gasket as supplied or 
     same year/model as vehicle.
H -- Carb has provision for evaporative canister.
I -- Carb has no provision for evaporative canister.
J -- Do not use Ford variable venturi OEM 2-bbl carb.
K -- Carb requires #8008 or #8024 stud, nut & washer kit.
L -- Carb requires #8003/8004/8022 rod kit. 
     Determine length before installing.
M -- Ford EGR adapter needed.
N -- Carb acceptable to factory cruise control.
O -- Carb has manual choke only.
P -- Carb is not a stock replacement part.

*Not legal for sale or use on pollution controlled motor vehicles.

Ford 289-302 V8 | Ford 5.0L EFI |
Ford 351 Windsor V8 | Ford Truck 5.8L EFI | Ford 351-M |
Ford 351-C | Ford 332-428 | Ford 429 and 460