DISC BRAKE KITS
All the components needed to complete your 2" Dropped Spindle installation for either S-10 or Early GM calipers. Includes rotors, Calipers with Pads, Bearings and Seals, Spindle Nuts, Dust Caps, Hoses and Banjo Bolts. The "Conversion Kit" updates early stock spindle disc brake kits to our 2" spindles.
Complete Brake Kit Late GM, DF-203 |
$289 |
Complete Brake Kit Early Chevelle, DF-203-B |
$299 |
Conversion Kit, Early Disc Brake (Use Existing Calipers), DF-203-S |
$129 |
POLISHED BILLET DISC BRAKE KITS
The ultimate upgrade to go with your Polished A-Arms, or Coil-Overs is this Polished Billet Brake Disc Kit. Includes Wilwood Polished Aluminum Calipers with Pads, Polished Aluminum Hubs with 11 " Vented Rotors, Bearings and Seals, Caliper Brackets and Hardware. Braided Stainless Lines available separately.
Polished Billet Complete Brake Kit, DF-205 |
$895 |
1" Dropped Coil Springs (Pr.) |
1" DROPPED COIL SPRINGS To give your 'Shoebox' an even lower look, add these Heidt's 1" Dropped Coil Springs. Combined with our 2" Dropped Spindles, they will put your cruiser a full 3'" in the weeds safely and easily. For use with either stock arms or our tubular A-Arms.
|
Power Booster &
Dual Master Cylinder
POWER BOOSTER & DUAL MASTER CYLINDER
Power Brakes for your '55-'57 Chevy. Kit includes: Power Booster, Dual Master Cylinder and correct Proportioning Valve for Disc-Drum or Disc-Disc cars. Designed for use with our Disc Brake Kits. Fully assembled and plumbed, ready for installation.
Power Booster & Dual Master Cylinder, (Disc/Drum), DB-102 |
$399 |
Power Booster & Dual Master Cylinder, (Disc/Disc), DB-102-D |
$399 |
|
BALL JOINT CAPS The finishing touch to your suspension. Cover those upper ball joints with our Ball Joint Caps. They are polished stainless steel. including polished screws.
|
STABILIZER BARS
Stabilizer bars, or sway bars, are used to help control body roll and sway. Heidt's Stabilizer Bars for '55-'57 Chevys are made of heat treated steel and are gold zinc plated. They are available in either 7/8" or 1" bar, with either rubber or urethane bushings.
Stabilizer Bar Kit, 7/8" Bar, Rubber Bushings SB-050-R |
$159 |
Stabilizer Bar Kit, 7/8" Bar, Urethane Bushings SB-050-U |
$175 |
Stabilizer Bar Kit, 1" Bar, Rubber Bushings SB-051-R |
$159 |
Stabilizer Bar Kit, 1" Bar, Urethane Bushings SB-05-U |
$175 |
UPPER & LOWER CONTROL ARM BUSHING CAPS
|
Our new Upper & Lower Control Arm Bushing Caps add the final touch to your suspension. They are fully polished aluminum, in a set of eight, with polished stainless bolts, and will fit both our Tubular Control Arms or stock control arms.
|
