Bill's Hot Rod Company

The bracket mounts using the existing factory drilled holes found on the front face of the heads: 3 holes on the drivers side, and 1 holes on the passenger side, therefore no drilling or tapping is required. They are positioned over the intake manifold & to the inside edge of the valve covers.

Brackets are available in Black Powder Paint, Chrome Plated or Bare Steel. All brackets come completely assembled with an adjusting arm, all the necessary bolts, illustrated instructions, belt size recommendations and belt adjusting tips for easy installation.

The 200 series is designed for the Small Block Chevy using Early Style heads (1969 and earlier)

The brackets mount to the intake manifold bolts and the water pump bolts only, not the heads, therefore no drilling or tapping is required. They are positioned over the intake manifold and to the inside edge of the valve covers

These brackets can be used with the short water pumps only.

Brackets are available in Black Powder Paint, Chrome Plated or Bare Steel. All brackets come completely assembled with an adjusting arm, all the necessary bolts, illustrated instructions, belt size recommendations and belt adjusting tips for easy installation.

The 300 series is designed for the Small Block Chevy.

The bracket mounts to the lower left front of the block using the two lower bolt holes, located by the timing chain cover, The adjusting arm mounts to the lower water pump bolt holes.
The bracket has two mounting positions: low and high (as shown in the pictures).
The bracket fits close to the block and will work with an 8 inch harmonic balancer.
With its wide range or adjustment. it is able to fit many applications. Use the WS series bracket when using the 600 series Alternator and AC brackets.

These brackets can be used with the short  or long water pumps.

Use the G. M. Saginaw Power Steering Pump with attached reservoir.

Brackets are available in Black Powder Paint, Chrome Plated or Bare Steel. All brackets come completely assembled with an adjusting arm, all the necessary bolts, illustrated instructions, belt size recommendations and belt adjusting tips for easy installation.

Brackets are available in Black Powder Paint, Chrome Plated or Bare Steel. All brackets come completely assembled with an adjusting arm, all the necessary bolts, illustrated instructions, belt size recommendations and belt adjusting tips for easy installation.

The 500 series is designed for the Big Block Chevy

The bracket mounts using the two lower bolt holes on the lower left front of the block, located by the timing chain cover.
The adjusting arm mounts using the lower left water pump bolt holes.
The bracket has 3 positions: low medium and high (as shown in the pictures).
The bracket fits close to the block, and because of its wide range or adjustment, it is able to fit many applications

These brackets can be used with the short  or long water pumps.

Use the G. M. Saginaw Power Steering Pump with attached reservoir.

Brackets are available in Black Powder Paint, Chrome Plated or Bare Steel. All brackets come completely assembled with an adjusting arm, all the necessary bolts, illustrated instructions, belt size recommendations and belt adjusting tips for easy installation.

The 600 series is designed for the Small Block Chevy using the Late Style heads  (1970 and later)

The brackets mount to the front face of the heads using only the existing factory drilled holes: 3 on the drivers side and 1 on the passengers side. , therefore no drilling or tapping is required.
Some minor grinding or filling on the valve cover gasket flange may be needed: Please call for more details,
The Alternator and Air Conditioner units are positioned over the valve covers.

Brackets will work with either stock or tall valve covers when ordering we will need to know the height of the valve covers to supply the correct bracket for your set up

These brackets can be used with the short  or long water pumps.

The alternator used is a G. M. and the air conditioner compressor is a Sanden SD-508

Brackets are available in Black Powder Paint, Chrome Plated or Bare Steel. All brackets come completely assembled with an adjusting arm, all the necessary bolts, illustrated instructions, belt size recommendations and belt adjusting tips for easy installation.

Use the WS series power steering brackets.

The 700 series is designed for the Serpentine kit the Small Block Chevy using the 100 series or the 600 series brackets

The brackets mount to the front face of the heads using only the existing factory drilled holes: 3 on the drivers side and 1 on the passengers side. , therefore no drilling or tapping is required.  Some minor grinding or filling on the valve cover gasket flange may be needed.  The Alternator and Air Conditioner units are positioned over the valve covers.

Water Pump must be a reverse rotation type such as the flow Kooler Aluminum Pump with the small bolt pattern and hub the 5.625" offset for the hub.  Parts needed will include the brackets, pulleys, water pump, alternator compressor and serpentine belt.
If you are using power steering, you will also need the power steering bracket and the V-belt on technical section you will find what combinations are available.  

These brackets can be used with the short water pump only.

The alternator used is a G. M. and the air conditioner compressor is a Sanden SD-508

Brackets are available in Black Powder Paint, Chrome Plated or Bare Steel. All brackets come completely assembled with an adjusting arm, all the necessary bolts, illustrated instructions, belt size recommendations and belt adjusting tips for easy installation.
 

The 1100 series is designed for the Late Style heads (1970 and later)

The brackets mount using only the existing factory drilled holes found on the front of the heads.3 on the drivers side and 1 on the passenger side, Therefore no drilling or tapping is required.  They are positioned over the exhaust manifold and the outside edge of the valve covers.

These brackets can be used with the short or long water pumps.

The alternator used is a G. M. and the air conditioner compressor is a Sanden SD-508

Brackets will work with either stock or tall valve covers when ordering we will need to know the height of the valve covers to supply the correct bracket for your set up

These brackets can be used with the short  or long water pumps.

The alternator used is a G. M. and the air conditioner compressor is a Sanden SD-508

Brackets are available in Black Powder Paint, Chrome Plated or Bare Steel. All brackets come completely assembled with an adjusting arm, all the necessary bolts, illustrated instructions, belt size recommendations and belt adjusting tips for easy installation.

The 1200 series is designed for the Small Block Chevy for the side mount brackets (1100 series) only

The bracket mounts to the lower left front of the block using the two lower bolt holes, located by the timing chain cover. The adjuster mounts to the alternator bracket (1100 series) black plate.

These brackets can be used with the short or long water pumps.

The alternator used is a G. M. and the air conditioner compressor is a Sanden SD-508

Brackets are available in Black Powder Paint, Chrome Plated or Bare Steel. All brackets come completely assembled with an adjusting arm, all the necessary bolts, illustrated instructions, belt size recommendations and belt adjusting tips for easy installation.