![]() |
![]() |
|
| 1-888-875-6666 | ||
|
||
The 200 series is designed for the Small Block Chevy using Early Style heads (1969 and earlier)
The brackets mount to the intake manifold bolts and the water pump bolts only, not the heads, therefore no drilling or tapping is required. They are positioned over the intake manifold and to the inside edge of the valve covers
These brackets can be used with the short water pumps only.
The alternator used is a G. M. and the air conditioner compressor is a Sanden SD-508
Stock steel or aluminum pulleys can be used with the set up
Brackets are available in Black Powder Paint (standard finish), Chrome Plated (additional cost) or Bare Steel (reduced cost). All brackets come completely assembled with an adjusting arm, all the necessary bolts, illustrated instructions, belt size recommendations and belt adjusting tips for easy installation.
|
Early Style Heads are 1969 and earlier and have no
accessories holes on the face of the heads |
|
Late Style Heads are 1970 and later and have 3 factory
drilled holes on the left head, and 1 on the right head |
|
Vortec Style Heads have vertical bolts in intake
manifold. Only the 100 series and 1100 series available to accept
this style of head. Please add a 'V' to the part number |
|
Notes: |
| Store Home • About Hot Rods USA • Shipping • Returns • Privacy Policy |
| Email moonmr@hotrodsusa.com for questions or comments. Contact us toll free at (888) 875-6666 or at (360) 210-5376. We appreciate your patronage. This site is protected by copyright and trademark laws under US and International law. All rights reserved. © 2003-2005 Hot Rods USA, Inc. No reproduction without written approval. Copyrights held by their respective owners. Information and pricing subject to change without notice. |