Billet SL4R Radial Mount
Caliper for 14" Discs:
This specially configured Superlite SL4R narrow body caliper features
an increased bridge radius to allow proper pad alignment and bridge clearance
for use with 13.00" to 14.00" diameter rotors. A special body design
is used with 16 mm pads to provide the narrowest possible profile for tight
clearance applications. Radial mounting simplifies adaptation and provides two
planes of adjustment for accurate alignment over the disc. These calipers integrate
"Big Brake" style with Wilwood's latest technology to generate big
stopping power over a broad range of custom, high performance, and off road
vehicle applications.
A key to the superior performance of the SL4R comes from the extremely
durable and efficient body design. It is the product of computer generated solid
modeling and FEA stress analysis technology. A reinforced radial transition
from the piston bore housings to the closed end bridges has produced the strongest
Superlite caliper bodies ever built. Additional strength and resistance to deflection
comes from the four high-strength steel end bridge bolts. A fifth center bridge
bolt provides even more overall strength and easy access to the pads without
the need to remove the caliper from the mount.
This special group of SL4R calipers is assembled with machined aluminum
pistons and rubber dust boots. Coated aluminum is lightweight with high resistance
to corrosion and fast heat dissipation qualities. The dust boots seal out all
debris to keep the pistons and caliper bores running smooth in the harshest
environments. High temperature square faced bore seals have the largest possible
sealing area and provide controlled piston retraction on release. Three piston
bore options are available to match the fluid and brake clamping bias requirements
of any custom vehicle application.
In addition, each SL4R is equipped with SRS bridge plates. SRS plates
eliminiate all bridge wear caused by pad gauging and extend the service life
of the caliper. The spring-loaded action of the SRS plates also eliminates pad
rattle and dampens the harmonic vibrations that contribute to pad squeal. Two
piece bleed screws and dampened fluid tubes are recess mounted to shield them
from track debris and other potential damage sources. A full range of PolyMatrix
pad compounds is available to match the brake response and heat range of any
competition or sports driving application.
Ordering Information,
Narrow Body SL4R for 14.00" Discs with 16 mm Pads: |
Bore
Size |
Disc
Width |
Part
Number |
1.75" 44,5
mm |
1.25" 31,8
mm |
120-8071-R/L |
1.75" 44,5
mm |
1.10" 27,9
mm |
120-8070-R/L |
1.38" 35,0
mm |
1.25" 31,8
mm |
120-8065-R/L |
1.38" 35,0
mm |
1.10" 27,9
mm |
120-8064-R/L |
1.25" 31,8
mm |
1.25" 31,8
mm |
120-8063-R/L |
1.25" 31,8
mm |
1.10" 27,9
mm |
120-8062-R/L |
|
