 |
 |
 |
| 1-888-875-6666 | ||
|
||
|
|||||||
|
|
|
|
|
|
|
|
|
|
New Products
|
49-54 Chev Pass & 53-62 Corvette Front Brakes
New 49-54 Chevrolet Passenger and 53-62 Corvette brake kit with new spindles. Short spud allows for our custom Zero Offset brake kits to be used. Rotors sizes 11.75", 12.19" and 12.90" with Dynalite or DynaPro 6 Piston.For additional information on brakes see 49-59 Chev and Corvette Brake kits. Optional color calipers available upon request. |
50k & 65K Volt HEI Distributors with Wires Ignition Plus HEI 50k & 65K Volt Distributors with 8.5mm spark plug wires with life time warranty. We now have the following HEI's in Chevrolet 65k, Chev V6, Chev 230, 250, 292 Inline 6 65k, 57-82 Corvette w/Mechanical Tach Drive 65k, Pontiac 50k, Oldsmoble 50k, AMC 6 50k, AMC V8 50k, Ford 289-302 50k and Ford 351C, 400M, 429 & 460 50k. All Ignition Plus distributors carry 7 year warranty on electronic parts. Chevys. Picture shows Chevrolet distributor, color of cap is either black, red or red/grey depending on the shipment we have in. Color choice is NOT an option for this low pricing. Click on the the picture for additional information on the wiring lengths. |
GM Chevy 65k Inline 6 HEI Distributor IGN 8889065 65k Volt HEI for the GMC and Chevy Inline 6 194, 230, 250 & 292 cubic inch engines by Ignition Plus. 7 year warranty on electronic parts. |
GM Opti-Spark Distributor
IGN 8889070 Performance Replacement Distributor for the GM Opti-Spark. Perfect replacement for the prone-to-fail OE unit. All new construction features: New aluminum housing with heavy duty Oil-lite bushings, high dielectric strength glass reinforced cap, epoxy over mold and brass contacts with balanced rotor, cross flow vent design & includes new pin drive shaft seals and installation hardware. Application: 1994 Chevrolet Caprice 4.3L/5.7L and Impala SS 5.7L LT-1 V8, 1993-94 Buick Roadmaster 5.7L LT-1 V8, 192-94 Cadillac Fleetwood 5.7L LT-1 V8, 1993-94 Chevrolet Camaro 5.7L LT-1/LT-4 V8, 1992-94 Chevrolet Corvette 5.7L LT-1/LT-4 V8 & 1993-94 Pontiac Firebird 5.7L LT-1/LT-4 V8. (MSD 8381) |
GM Opti-Spark II Distributor
IGN 8889071 Performance Replacement Distributor for the GM Opti-Spark II. Perfect replacement for the prone-to-fail OE unit. Application: 1994-1/2 to '96 Chevrolet Caprice 4.3L/5.7L and Impala SS 5.7L LT-1 V8, 1994-1/2 to '96 Buick Roadmaster 5.7L LT-1 V8, 1994-1/2 to '96 Cadillac Fleetwood 5.7L LT-1 V8, 1995-97 Chevrolet Camaro 5.7L LT-1/LT-4 V8, 1995-96 Chevrolet Corvette 5.7L LT-1/LT-4 V8 & 1995-97 Pontiac Firebird 5.7L LT-1/LT-4 V8. (Accel cross ref #59125) |
Hot Rods USA Black Hat
HOT 0700001 Check out this hat! This by far will be the coolest hat you have ever owned. Available June 1st, 2008 |
 New 70-92 Camaro Zero Offset Front Brake Kits. We now offer our famous Zero Offset Brake Kits for the 2nd Generation Camaros. Our kit moves the wheel back approximately .800" towards the center of the car more than any existing Wilwood front brake kit. Click on this hyperlink for additional information. |
New C2-C3 Replacement Corvette Calipers by Wilwood New Wilwood direct replacement C2 & C3 Corvette Calipers. Click here for more info. Now you can enjoy 21st Century technology on your 40 year old Corvette. Weighing only 6 pounds these high quality calipers are direct replacements to your stock calipers. Comes in economy clear coated, black, red, blue and polished finishes. Special Offer includes free brake pads, brake lines and free shipping. |
New DynaPro 6 Piston Retro KitsDynaPro 6 Piston click here for more info. Having trouble stoping your car with an existing Wilwood kit? Now you can upgrade to the 6 Piston Dynapro without buying a new kit. This is a direct replacement to the Dynalite series calipers. Same size as the Forged Superlites. Benefit from the Superlite technology in this small package. We are able to maintain wheel clearance with this compact caliper because of the thinner brake pads. Fits all drag and race wheels where clearance is a problem for bigger calipers. Comes in Black, Red, Blue, Silver and Polished finishes. Add this to your shopping cart for 6 piston technology. Select the 1.62/1.38/138 for heavier cars, 1.62/1.12/112 for medium cars and 1.38/1.00/1.00 for lighter import cars. Upgrade one size for performance applications. This is a retro-fit includes 2 calipers and pads. |
New Flaming River Key Columns New Steering Columns with locking Key. Comes in 28, 30, 32, 33 & 35 inch lengths with paintable, polished stainless or black powder coated finishes. Click here for more info!
Special introductory offer 10% off and free shipping to lower 48 states. Click on the "Coupon" tab above. |
New Flaming River Key Columns with Shifter New Steering Columns with locking Key and Shifter. Comes in 28, 30, 32, 33 & 35 inch lengths with paintable, polished stainless or black powder coated finishes. Now you can replace your factory column with worn out ignition key with this new replacement with tilt. Click here for more info!
Special introductory offer 10% off and free shipping to lower 48 states. Click on the "Coupon" tab above. |
 New Honda rear brake kits with 11.00 and 12.19" rotors. Comes with parking brake assemble. Special Introductory Offer: Free upgrade to Red Calipers and free emergency brake cables. |
New QA1 - Carrara - Hal ShocksQA1 Products famous for the optional 576 valving shock. This is the best of the best.
|
Small Cap HEI Distributors Small cap HEI distributor. Must use 50K to 65K external coil for peak performance. Picture shows Chevy HEI small cap. Available for Chevy, Fords and Mopars.
|
Speed Tech 67-69 Camaro Front Suspension$2,090.00 New Camaro Sub Frame. The subframe is an affordable direct replacement for you’re worn out old subframe. This subframe offers the benefits of rack and pinion rear steer, sway bar, built in guildstrand mod, coil over shocks and.... you can reuse all your current Aftermarket suspension components, brakes and wheels. Or upgrade to our new high clearance control arm set (included in complete sub frame kit) The Sub frame accepts Small and Big Blocks using the stock oil pan and also accepts the LSx series using the ATS (American Touring Specialities)oil pan and motor mount adaptors. The following parts are included in the complete package: Control Arms, Sway Bar, QA1 Shocks & Springs and Unisteer Rack and Pinion kit.
Shipping charges quoted before ordering. This item does not include shipping charges. International orders shipped Bax Global. $200 crate charge on all orders. |
Speed Tech Control ArmsThe Tubular Control Arms are CAD designed Mandrel Bent and all components are either laser cut or CNC machined for exact tolerances. They are made from 1.5" Seemless tubing with a wall thickness of .155. The control arms come complete powder coated with Acetron GP® type bushings, factory style Moog™ ball Joints and Energy Suspension™ Urethane Bump Stops. Also included is an adjustable steering stop. |
Unisteer Unisteer rack & pinion coversion kits. This is a link only. See coupons for discount. |
