ACCESSORIES
Water Pumps |
Chevy Small Block
Reverse Rotation |
Part
# 9500 Corvette 1988
- 1991
Polished Aluminum (New)
|
Part
# P115 Corvette 1988 - 1991
Aluminum (remanufactured)
|
Part
# P105 Corvette 1988 - 1991
Polished Deluxe
(New Stewart)
|
Part
# P110 Corvette 1988 - 1991
Chromed (New)
|
Part
# P106 Short Style
for 1984-91 Vette (3/4 pilot shaft) (Polished New Edelbrock)
|
Part
# P100 Corvette 1988
- 1991
Polished Aluminum (New)
|
Chevy Small Block
Standard Rotation |
Part
# P205 Short Style for most 1955-72 (5/8 pilot
shaft) (Polished New Edelbrock)
|
Part
# P215 Long Style for most 1969-87 V8, V6 and
1973-86 trucks (5/8 pilot shaft)
(Polished New
Edelbrock)
|
|
Chevy
Big Block
Reverse
Rotation |
Part
# P130 Short Style Cast Iron (New Stewart)
|
Part
# P135 Short Style Polished Aluminum (New Stewart)
|
Part
# P140 Short Style for serpentine belt (5/8 pilot
shaft) (Non-polished New Edelbrock)
|
Part
# P145 Short Style for serpentine belt (5/8 pilot
shaft) (Polished New Edelbrock)
|
Chevy Big Block
Standard Rotation |
Part
# P235 Long Style (5/8 pilot shaft)
(Polished
New Edelbrock)
|
|
|
Ford
Small Block
Part
# P500
Short Reverse Rotation water pump
and timing cover from 1994 - 95 Mustang Required on
30020 and 30030 Series Kits
|
Part
# P500
New Ford SVO
|
|
HIGH PERFORMANCE
ELECTRIC FANS |
These high performance fans
have been designed to March Performance specifications.
Maximum Air Flow
Heavy Duty
Construction
Light Weight
100% Balanced
Used on the most exotic sports cars |
#P700
- 16" diameter puller style, mounts to inside of
engine compartment, 2360 CFM, Weighs 5.25 LBS. O.A.
DIA. 16.50" x 3.50" thick.
|
#P716
- Matching Bracket kit for P700 fan.
#P702 - Dual
11" diameter puller style fans, designed with high
speed by-pass ports for unrestricted air flow 2780 CFM,
Weighs 10.52 LBS. Width 23.50" x 16.25" High,
4.25" Thick.
#P717 - 195°
Thermostat kit with relay and harness.
#P718 - 185°
Thermostat kit with relay and harness.
#P719 - Extra
relay, required for fan #P702.
|
|
|
A/C
COMPRESSOR
Sanden with
Serpentine Pulley |
Part
# P410
Sanden 508
(Does
not include fittings)
Part
# P411
Sanden 7176
|
Part
# P410
Sanden 508 polished newer style HFC-134
refrigerant, with serpentine pulley (new).
Part #
P411
Sanden 7176 polished Compact style HFC-134
refrigerant, with serpentine pulley (new).
|
|
Part
# P475
Serpentine pulley and clutch for Sanden
508 compressor (perfect for converting your compressor
from V-belt to serpentine)
|
|
ADJUSTMENT
RODS
Stainless Steel
with Crome Moly Rod Ends |
- |
Span
in Inches |
Part
# |
Min. |
Max. |
RA-1.625 |
3.625 |
5.125 |
RA-2.500 |
4.500 |
6.000 |
RA-3.500 |
5.500 |
7.000 |
RA-4.375 |
6.375 |
7.875 |
RA-5.500 |
7.500 |
9.000 |
RA-6.000 |
8.000 |
9.500 |
RA-7.000 |
9.000 |
10.500 |
RA-7.625 |
9.625 |
11.125 |
RA-8.000 |
10.000 |
11.500 |
RA-8.625 |
10.625 |
12.500 |
RA-9.000 |
11.000 |
12.500 |
RA-9.500 |
11.500 |
13.000 |
RA-10.250 |
12.250 |
13.750 |
RA-11.500 |
13.500 |
15.000 |
RA-12.500 |
14.500 |
16.000 |
RA-13.500 |
15.500 |
17.000 |
RA-14.500 |
16.500 |
18.000 |
|
|
Rod Ends Part# RE-325 - 3/8? hole 3/8-24
RH thread with nut
Rod Ends Part# RE-326 - 3/8? hole 3/8-24 LH thread with
nut |
|
FAN EXTENSIONS |
Billit Aluminum, Matches March
Pulleys Clear Powder Coating.
"Universal Bolt Pattern"
Part
#350 "A" = .375" Long
Part
#351 "A" = 1" Long
Part
#352 "A" = 2" Long
Part
#353 "A" = 3" Long
|
|
