 |
 |
 |
| 1-888-875-6666 | ||
|
||
1928-34 Ford Cross Steer (RIGHT HAND STEER)
UNI 8000650-01
This Cross Steer unit is specifically designed for right hand drive 1928-1934 Ford street rods. This is just like our innovative Cross Steer design that steers off one side, creating very little bump steer that would occur using a traditional rack & pinion.
There is no play in the rack travel, as it is smooth and consistent through out the length of its travel. This means that Cross Steer eliminates tight spots and loose spots so common with conventional steering boxes.
The Cross Steer Rack & Pinion offers a significant reduction in steering effort, even at low speeds. Cross Steer has 6" of rack travel which travels at the rate of about 1.6 per rotation of the pinion, giving Cross Steer about 3-5/8 turns lock to lock as compared with a typical Vega-style steering box with 4 turns lock to lock. Plus, Cross Steer is competitively priced with current steering boxes.
This paticular Cross Steer kit utilizes a bracket that can either be bolted or welded to your frame, then it is a matter of attaching our link to your steering arm. The link is long enough to accommodate 46"-48" axles. The link comes threaded for the common 11/16" Early Ford Tie Rod End (Left handed thread) used on so many of these Fords. The kit does not come with a Tie Rod End but if you need one, we can supply you with that as well.
RACK SPECS:
* LENGTH: 33"
* TURNS LOCK TO LOCK: 3.75
* TRAVEL: 6"
* THREAD: 11/16"-18
* SPLINE: 9/16"-26
| Store Home • About Hot Rods USA • Shipping • Returns • Privacy Policy |
| Email moonmr@hotrodsusa.com for questions or comments. Contact us toll free at (888) 875-6666 or at (360) 210-5376. We appreciate your patronage. This site is protected by copyright and trademark laws under US and International law. All rights reserved. © 2003-2005 Hot Rods USA, Inc. No reproduction without written approval. Copyrights held by their respective owners. Information and pricing subject to change without notice. |