1-888-875-6666

Air Ride Road Grater S10

$1,695.00 $1,495.00 Our Price!

 

 

The NEW RoadGRATER™ system from Air Ride Technologies is a completely bolt-on 3 link wishbone rear air suspension. It includes a BOLT-ON super C notch assembly that is installed OVER the existing framerail BEFORE cutting. This ensures the rear frame section remains properly aligned with the front. These super C notches are contoured around the oem rivets so you don't have to spend hours trying to grind hardened rivets out! The airspring crossmembers easily bolt onto the super C notches and add to the structural integrity of the RoadGRATER™ system. The oem gas tank crossmember is removed with a sawzall (again, no rivets to grind) and the new RoadGRATER™ crossmember (which includes a new gas tank mount) is bolted into place. Even the oem gas tank strap is reused! The S10 RoadGRATER™ system is designed to be used with at least a 26" tall tire (275/35-18) and is capable of setting the frame on the ground with up to a 28" tall tire (275/35-20).       Up to 12" of DROP! This system will set the framerail on the ground with up to a 28" tall tire (275/35-20). Ride height is approximately 8" lower than oem. Completely bolt-on, NO welding! CNC lasercut bracketry is jig welded for accurate fit Powdercoated for lasting protection New gas tank crossmember offers 1.5" more driveshaft clearance AND extra framerail reinforcement. No more notching the gas tank crossmember! Firestone® tapered sleeve airsprings placed behind the axle offer up to 7.5" of suspension travel while minimizing intrusion into bed area. These airsprings offer MUCH superior ride quality than a double convoluted airspring. Lower bar mount eliminates front leafspring hangar for more ground clearance. Upper wishbone control arm bolts solidly to axle cover and requires NO gas tank modification! Super C notches and airspring crossmember are clearanced for oem frame rivets... no need to grind out existing rivets! The RoadGRATER™ is $1495 and can be BOLTED-ON in approximately 4 hours... in your driveway using a drill, sawzall, and handtools. A typical custom built and installed rear 4 link system will cost anywhere from $1500 to $2500, and you are at the mercy of the workmanship of the installer. Now the engineering expertise necessary for reliability and function can be included on the same box as your components!     Application Part # 82-03 S10 rear RoadGRATER system RGR1000 82-03 S10 front CoolRide w/control arm and bolt-on shock mounts  ARF5000LUCA BigRed 4 way compressor system ARC4700E   Return to catalog table of contents

 

Store Home • About Hot Rods USA • Shipping • Returns • Privacy Policy

Email moonmr@hotrodsusa.com for questions or comments. Contact us toll free at (888) 875-6666 or at (360) 210-5376. We appreciate your patronage. This site is protected by copyright and trademark laws under US and International law. All rights reserved. © 2003-2005 Hot Rods USA, Inc. No reproduction without written approval. Copyrights held by their respective owners. Information and pricing subject to change without notice.