 |
 |
 |
| 1-888-875-6666 | ||
|
||
55-57 Chevrolet Manual Rack & Pinion Conversion Kit
UNI 8000230/60
For drag racers using 1955-57 Chevy Cars on the track, this is the way to go. Drop the weight of that old steering box, power or manual, this will save you as much as 30lbs. Unisteer is pleased to have a bolt in Power or Manual Rack & Pinion Kit for 1955-57 Chevy Cars. This kit consists of a uniquely customized Saginaw Power Rack & Pinion, this custom built rack is narrow enough to match the original steering. Geometrically this rack matches the stock steering so there is very little bump steer! The Rack and Pinion is a remanufactured unit of the highest quality that comes with a lifetime warranty. The basic kit consists of the rack & pinion unit, outer tie rod ends, main bracket, mounting hardware, and new steering arms.
Installation is as easy as possible. The rack and pinion is mounted to our brackets using the provided hardware and the unit mounts in the stock holes from the factory steering system. The main bracket mounts to the same three bolt pattern as the factory steering box on Driver's side and the two bolt pattern for the idler-arm on the Passenger side. This bracket holds the rack and pinion in the same plane as center link from the stock steering.
For clearance issues, if your Chevy has clearance for the factory center link then you should have clearance for Unisteer's Tri-5 rack. The Rack and Pinion rests in the same place as that factory center drag link with a slightly bigger diameter.
As we provide new steering arms that bolt in, this will work with drop spindles. Research also shows that if you have Mike Mcgaughty's drop spindles move the steering arms in an inch on each side making it narrower than factory, this is an easy fix though and only requires the user to cut an inch off each thread of the tie rods.
The standard kit includes the Rack & Pinion, Brackets, Outer Tie Rod Ends & Steering Arms. That is what the basic Rack & Pinion kit consists of.
RACK SPECS:
- LENGTH: 43.5"
- TURNS LOCK TO LOCK: 2.65
- TRAVEL: 5"
- THREAD: 14mm x 1.5
- SPLINE: 17mm-DD
| Store Home • About Hot Rods USA • Shipping • Returns • Privacy Policy |
| Email moonmr@hotrodsusa.com for questions or comments. Contact us toll free at (888) 875-6666 or at (360) 210-5376. We appreciate your patronage. This site is protected by copyright and trademark laws under US and International law. All rights reserved. © 2003-2005 Hot Rods USA, Inc. No reproduction without written approval. Copyrights held by their respective owners. Information and pricing subject to change without notice. |