|
|
Corvette Wilwood 12.90" & 14.0" Disc Brake Conversion Kits
Corvette |
We have filled the void where Wilwood does not make a kit for your Corvette.
We now have front and rear brake kits that uses a special aluminum hub
and places the wheel in the same stock location. All kits utilize all
Wilwood parts except for the custom caliper brackets.
We now have a "Zero Offset" brake kit for these spindles. By
designing a special hub this brake kit does not move the hubs out and retains
stock turning radius.
 Add the Forged
Superlite and DynaPro6 upgrades to your "Zero Offset"
11.75 or 12.19 brake kit. Inexpensive addition to get a 9.5"
caliper upgrade.
Please take the time to read the Brake Article and Frequent Asked
Question, the time you spend reading this will be well worth your
trouble and might even save someone's life.
10.75" rotors 14" or larger rims
11.00" rotors 15" steel rims & all reproduction wheels
11.75" rotors most 15" after market aluminum wheels
12.19" rotors most 16" after market aluminum wheels
12.90" rotors all 17" rims
14.00" rotors all 18" rims
New C2-C3 Replacement Corvette Calipers by Wilwood. Now you can enjoy 21st Century technology on your 40 year old Corvette. Weighing only 6 pounds these high quality calipers are direct replacements to your stock calipers. Comes in economy clear coated, black, red, blue and polished finishes. Special Offer includes free brake pads, brake lines and free shipping to lower 48 states. $ave over $300. Contact us for group purchases.
Upon special request we will build you a road race kit using any caliper in the Wilwood line. Pricing will depend on specfications. |
Year |
Part Number |
Rotor Size
Note
1 & 13 |
Type of Calipers
Note 2 |
Notes |
| |
54-62 Corvette Front |
|
|
|
54-62 |
C-5401ZDP6 |
11.75" x .810" |
|
1,2 & 4 |
54-62 |
C-5402ZDP6 |
12.19" x .810" |
|
1,2 & 4 |
| |
1963-64 Corvette Front |
|
|
|
63-64 |
C10-5329 |
11.75" x .810" |
Dynalite |
1, 2 & 3 |
63-64 |
C10-5901ZFS |
11.75" x .810" |
Forged Superlite 4 |
1, 2 & 4 |
63-64 |
C10-5902ZFS |
12.19" x .810" |
Forged Superlite 4 |
1, 2 & 4 |
63-64 |
C10-5903ZS6 |
12.90" x 1.10" |
Superlite 6 |
1, 2 & 4 |
| |
65-82 Retro Caliper & Pads(4) |
|
|
|
65-82 |
C15-1052526 |
4 Calipers Only |
Corvette C2 C3 |
11 |
| |
1965-68 Corvette Front |
|
|
|
65-68 |
C15-6501ZFS |
11.75" x .810" |
Forged Superlite 4 |
1, 2 & 4 |
65-68 |
C15-6502ZFS |
12.19" x .810" |
Forged Superlite 4 |
1, 2 & 4 |
65-68 |
C15-6503ZS6 |
12.90" x 1.10" |
Superlite 6 |
1, 2 & 4 |
65-68 |
C15-6504ZS6 |
14.0" x 1.10" |
Superlite 6 |
1, 2 & 4 |
65-82 |
C15-10616 |
12.90" x 1.10" |
Superlite 6 |
12 |
65-82 |
C15-10617 |
14.0" x 1.10" |
Superlite 6 |
12 |
| |
1969-82 Corvette Front |
|
|
|
69-82 |
C15-6901ZFS |
11.75" x .810" |
Forged Superlite 4 |
1, 2 & 4 |
69-82 |
C15-6902ZFS |
12.19" x .810" |
Forged Superlite 4 |
1, 2 & 4 |
69-82 |
C15-6903ZS6 |
12.90" x 1.10" |
Superlite 6 |
1, 2 & 4 |
| |
1984-87 Corvette Front |
|
|
|
84-87 |
C11-8403ZS6 |
12.90" x 1.10" |
Superlite 6 |
1, 2 & 4 |
| |
1988-96 Corvette Front |
|
|
|
88-96 |
C11-8337 |
12.90" x 1.10" |
Superlite 6 |
|
88-96 |
C11-9298 |
14.0" x 1.10" |
Superlite 6 |
|
|
1997- 09 Corvette Front |
|
|
|
97-04 |
C12-8031 |
12.90" x 1.10" |
Superlite 6 |
|
97-04 |
C12-8230 |
14.0" x 1.10" |
Superlite 6 |
|
97-08 |
C12-10163 |
14.25" x 1.10 |
|
|
05-06 |
C12-8921 |
12.90" x 1.10" |
Superlite 6 |
|
05-06 |
C12-8922 |
14.0" x 1.10" |
Superlite 6 |
|
|
Corvette Rear Kits (14) |
|
|
|
63-82 |
CR15-1632 |
12.19" x .810" |
Dynalite |
5, 7, 8, 14 |
63-82 |
CR15-1633S4 |
12.90" x 1.10" |
Superlite 4 |
5, 6, 7,8, 14 |
63-82 |
CR15-1634S4 |
14.0" x 1.10" |
Superlite 4 |
5, 6, 7, 8, 14 |
65-82 |
CR15-10471 |
12.90" x 1.10" |
Superlite 4 |
10 |
65-82 |
CR15-10472 |
14.0" x 1.10" |
Superlite 4 |
10 |
84-87 |
CR11-1843S4 |
12.90" x 1.10" |
Superlite 4 |
5, 6, 7, 8 |
84-87 |
CR11-1844S4 |
14.0" x 1.10" |
Superlite 4 |
5, 6, 7, 8 |
88-96 |
CR11-2873S4 |
12.90" x 1.10" |
Superlite 4 |
|
88-96 |
CR11-2874S4 |
14" x 1.10" |
Superlite 4 |
|
97-05 |
CR12-8032 |
12.90" x 1.10" |
Superlite 4 |
10 |
97-05 |
CR12-9119 |
14" x 1.10" |
Superlite 4 |
10 |
Note 1: D=Drilled Slotted G=Gas Vented available in .810 to 1.38" thickness
Note 2: R=Red BL=Blue SL=Silver P=Polish Available in all models. Inquire before ordering.
Note 3: Moves the track out approximately 1" (1/2" per side). Requires
offset wheels. Recommend the installation of brake kit before you purchase
new wheels.
Note 4: Does not move the wheel out. Zero Offset
Note 5: Rear brake kit with Wilwood internal parking brake assembly.
Note 6: Uses Superlite
4 piston radial mount calipers.
Note 7: Replaces stock parking brake with new internal parking brake assembly.
Note 8: Includes stainless steel flexible rear trailing arm brake line kits.
B6F 2490065K includes: Two 18"
SS Lines, two male 3/8 Inverted Flare x -3 male adapters and two -3 x 1/8" NPT adapters.
Use 2490063K for 1/4" stock lines and 2490065K for 3/16" stock
lines.
Note 9: Applications with Forge Superlite may require a wheel spacer 0.050
to 0.150". Wilwood hub shield 300-7500 is 0.050" thick.
Note 10: Hat and Rotor replacement only does not replace parking brake assembly see our custom kits for parking brake assembly.
Note 11: Retro replacement calipers for 65-82. Includes 2 front & 2 rear calipers and brake pads and DOT stainless brake lines.
Note 12: This kit does not replace the stock steel hub assembly. Hat and rotor kit. See our Custom kits for kits with Zero Offset using custom aluminum hubs.
Note 13: Custom rotors are balanced. Available plain or gas vented only.Add "G" for gas vented.
Note 14: Offset trailing arms availabe with kit. Can be ordered with brake kit installed. Requires axles, hub carrier, coupler, axle washer and nut to be reused. New bearings will be installed.
|
|
11.75" w/Forged Superlite |
Offset Arms |
7" Long Dynalite |
Wilwood Master Cylinder
|
12.90" Superlite 6 |
9.5" DynaPro 6 Piston |
Superlite Rear with Park Brake |
Dynalite Rear with Park Brake |
11" Long W6 |
9.5" Long Superlite 6 |
9.5" Long Forged Superlite |
12.90" w/Scalloped Rotors |
|
12.90" Scallop Rear w/PB |
|
